misting pump, mistin fog , fog nozzle ,Natural fog; ruby nozzle ;power sprayer ; 冷雾，自然雾;喷雾机，ULV 喷雾，高程喷雾机，消毒喷雾机,Finefog CO.LTD.

Home

Application

Cooling fog system

FAQ

Sprayer

Ralpantone

Contact info

中文站

2007 New type and PATENT with 25KG water bag built in , can continue 4hours
The natural fog pump: Pressure 1160PSI Flow 0.8 GPM Power 750W 50HZ 220V /60HZ 110V Speed 960 RPM/1150RPM C W：30kg， N W：28KG SIZE：44*44*42CM

STAINLESS STEEL FOG NOZZLE SERIES SJN-02SS
INDUSTRIAL DUTY - ALL STAINLESS STEEL

This HIGHEST QUALITY ALL STAINLESS STEEL Industrial duty nozzle with anti-drip. For continuous 10 year duty used in both our 12/24 thread size stainless steel and super-flex fog line. Also used as quality replacement in most quality brands of fog systems. Produces superfine 10 micron water droplets and 0.008" nozzle orifice. 10 micron droplets are 1/10 - the diameter of a human hair. Unique check valve prevents the nozzle from dripping after shut down and reduces calcium build-up. These nozzles are for continuous duty FOG applications. All FineFog, USA Nozzles are delivered fully assembled and ready to install. The new 100SC version of this popular nozzle is fully cleanable and repairable allowing for extra years of service duty.

SERIES SJC-02 - BRONZE FITTED FOG NOZZLE
INDUSTRIAL DUTY BRONZE FITTED - STAINLESS STEEL

This TOP QUALITY fog nozzle with anti-drip valve. Used in both our 12/24 thread sized stainless steel and super-flex fog line. Also used as quality replacements for most brands of fog systems. Produces superfine 10 micron water droplets and 0.008" nozzle orifice. 10 micron droplets are 1/10 - the diameter of a human hair. Unique check valve prevents the nozzle from dripping after shut down and reduces calcium build-up. These nozzles are for intermittent industrial duty FOG applications. All FineFog, USA Nozzles are delivered fully assembled and ready to install. The new 100BC version of this popular nozzle is fully cleanable and repairable allowing for extra years of service duty.

RUBY NOZZLES IN STAINLESS STEEL BODY

RUBY NOZZLE
Model SJN-RJ

Comparing with other nozzles, this nozzle can reach the most fine fogdrop.
Fogdrop :thinner than 10um
Fog area :Conical Type
Angle with 60~90 centigrade
Volume with 0.116 L/min@1000psi

Ruby and sapphire orifice nozzle with fine pin, patend certificate. Be used in the field of artifical sight, fountain, humidifier, etc. Inlay the ture ruby. Wearable and long life then all other type nozzles 10times .

Each one are with 5 micron filter built in and can replaced after right time use. Price includes one attached filter .

Available in any nozzle configuration or spacing pattern

FINE-easy FOG SYSTEM slip lock fitting SERIES:SJC05

HIGH QUALITY AND ECONOMICAL

Fine easy is a popular system when quick and simple installation is necessary. with one 12/24 or two hole can be mounted the nozzles, A high quality product for use in greenhouses, outdoor cooling, odor control, poultry farms, dust suppression and any general humidification application. Fine-easy operates at up to 1200 PSI. and is easy to assemble by hand:)

Make simple and reliable coupling attachments with our FineFog 3/8"inch slip lock fitting with nozzle port for 12/24 TF100 series nozzles and is used with our quality Fine-easy fog nylon line made of Furon Thermoplastic; 4:1 burst pressure, ultra violet resistant.

FineFog Mist Cooling Fan Conversion Kit
INDUSTRIAL DUTY
CHROME PLATED STAINLESS STEEL FAN RINGS

This wind tunnel designed and tested quality fog ring was created for simple conversion of any industrial duty fan you choose. Constructed of high quality chrome plated stainless steel. Price includes Eight of our best 12/24 thread size bronze fitted stainless steel series 100B nozzles with each mist cooling fan ring to insure a lifetime of quality dependability and serviceability. This industrial duty fog fan ring produces a super fine 10 micron water droplet with a 0.008" nozzle orifice. 10 micron droplets are 1/10 - the diameter of a human hair. This combination of quality FineFog components make certain you will experience full and complete evaporation of all moisture created by the system.

The unique check valve on each nozzle prevents the nozzles from dripping after shut down to reduce calcium build-up and eliminate unwanted puddles of water, eliminating slip and fall hazards that our competitive products are known for.

SERIES SJN-04U - MIST NOZZLE
COMMERCIAL DUTY BRONZE FITTED, STAINLESS STEEL

Designed for use in systems that require nozzles to adapt to 1/8 MPT pipe thread fog line such as cattle cooling and poultry house cooling systems. This 5 year commercial duty nozzle Produces superfine 10 micron water droplets and 0.008" nozzle orifice. 10 micron droplets are 1/10 - the diameter of a human hair. Unique check valve prevents the nozzle from dripping after shut down and reduces calcium build-up. Price includes one attached 5 micron filter and spare filters are sold separately. These nozzles are for intermittent commercial duty FOG applications. All FineFog, Nozzles are delivered fully assembled and ready to install.

NOZZLE NEW Fitting(SJC-06)

Nozzle new fitting are used to connect nozzle and some stainless tube or brass tubemisting line line where atomization may be desired for heavy using. Available in brass with 10/24 and 12/24 thread sizes in the middle of fitting,and the tube model is 3/8" too. we have the different fitting like "L" and "Tee" can meet all system connect use.

STAINLESS STEEL NOZZLE SPIGOTS

These stainless steel spigots, sometimes called risers, are designed to be TIG welded to 1/2 inch grade 304 or 316 stainless steel tubing allowing the attachment of our 12/24 thread size series 100 nozzle. This allows for the fabrication of complete stainless steel fog line that has proven the most effective system for long life and trouble free performance in all applications requiring a top quality fogging systems.

FineFOG, USA-TRIPLE FILTRATION SYSTEM

The FineFog 10-5-1 Micron Triple filtration system is designed to remove sediment, rust, and sand from all the water entering your FineFog pump module and help prevent nozzle blockage from foreign debris. The FineFog filtration system works to avoid sediment build up in your system helping to protect your fog module and nozzles from pre-mature service caused by excessive build-up calcium deposits and other foreign matter blocking the nozzle orifice.